3000
Series* Flat Band Die Plate Dater
| << IMPORTANT >> |
|
Multi-Surface Stamps by iStamp June 2010 - Stamps for use on non-porous surfaces are now available in 10 sizes including 2 extra large sizes. Click here to find out more.
iStamp Release June 2010 - A new range of pre-inked stamps is now available. 10 sizes including 2 extra large sizes are now available. Click here to find out more.
Low Emmissions Manufacturing Making rubber stamps can consume enormous amounts of energy while producing large quantities of effluent or waste, not to mention the noxious odours from some methods. Make stamps the clean and efficient way - click here to find out more.
Deskmate 32mm Stamps Coming Soon May 2010 - Deskmate stamps with a 32mm square dieplate are not far away! Off tool samples are currently being tested. we expect stock to be available in the next 2 or 3 months.
More Deskmate models. May 2010 - Deskmate have plans for 4 additional sizes which they hope to introduce over the next 6 months.
|
| The value priced 3000 flat band, die plate daters offer
the same ergonomic handle as the more expensive IDEAL die plate daters. |
|
 |
IDEAL 3000-A* Die plate size: 1.875" x 1.125" 48mm x 30mm IDEAL 3000-D* Die plate size: 2.5" x 1.5" 64mm x 38mm The value priced 3000 flat band, die plate daters offer the same ergonomic handle as the more expensive IDEAL die plate daters. |
| Heavy duty, flat band, die plate daters designed for
high volume applications where imprint space is limited and a full die plate is required. |
|
 |
IDEAL 3525* Die plate size: 1.25" x 1.25" 32mm x 32mm IDEAL 3550* Die plate size: 1.25" x 1.5" 32mm x 38mm |
| Heavy duty, flat band, die plate daters designed for high volume applications where imprint space is limited | |
 |
3350 Single Bridge* Die plate size: .25" x 1.25" 7mm x 32mm |
| Heavy duty, flat band, die plate daters
designed for high volume applications where imprint space is limited |
|
 |
3450 Double Bridge*
|
|
Heavy duty, flat band, die plate daters designed for special applications. |
|
 |
3110* Die Plate Size: .375" x .375" 10mm x 10mm 3150* Die Plate Size: .375" x 1" 10mm x 26mm 3130* Die Plate Size: .375" x .75" 10mm x 20mm 3170* Die Plate Size: .375" x 1.5" 10mm x 38mm |
| * Special locking grooves on the back of the date band mechanism provide a sure positioning system for accurate band alignment. | |