Photopolymer Platemaking Equipment

IDEAL System 2200
A versatile computer controlled platemaking system
designed for efficiency and productivity

 

Plate Size: Any size up to 12"x17" (A3) System Functions: Exposure, washout, post exposure, dryer, polymer warming cabinet, and light table for checking the quality of your negatives. (220v 50/60hz) Stainless Steel (INOX) The System 2200 is controlled by a microprocessor logic system that monitors all functions. Each function has a digital timer. If temperature is involved, a separate digital temperature controller allows you to accurately monitor the function. Versatile Processing Features: The plate exposure system is designed to process liquid polymer, and in conjunction with a second washout system (System 2100) can process sheet or plastic backed sheet polymers. (The second washout system would be needed because of the differences in washout solution used in liquid and metal backed polymer processes).

Special Features Exposure System: A vacuum system is built into the lower glass plate of the exposure system. This holds the cover film down to the lower glass when making liquid or sheet polymer. An air pressure removal system is included to remove any bubbles that may occur in the photopolymer. There are three timers that control the exposure process. Two of the timers simultaneously control the upper and lower exposure bulbs. A third timer controls the post exposure process. The glass plates in the exposure system are spring loaded to automatically adjust to any preset thickness up to 0.275"(7mm). Thickness changes are made simple by using our unique, interchangeable thickness posts. In just seconds the thickness posts can be changed to a different die thickness. A large warming cabinet controls the temperature of the photopolymer year round. Photopolymer is very hard to work with when it gets cold. You will find this a very useful feature. When the photopolymer is warmed to 95F (35C), it is significantly easier to work with. Washout System: The washout system provides thorough and quick washouts. The water in the washout section is recirculated by the oscillating motion of the plate holder. Post Exposure and Dryer Section: The post exposure drawer is glass covered to keep your machine clean. It was designed for easy access and fast water changes. The dryer drawer is used to dry the washed out photopolymer plate. This function is optional with liquid polymers, but necessary with sheet polymers. Built-In Light Box: A conveniently located light box on top of the washout lid allows you to effectively check your negatives for opacity. Bulb Life Indicators: The microprocessor system keeps an internal memory of the bulb life. This helps you determine when it is time to replace your bulbs. Built-In Storage Space: Store all your supplies on the shelves and drawers provided in the System 2200. Modular Components Are Easily Removed: The system's electrical components, pumps and motors are installed with "plug in" connectors for easy repair, if necessary. Customize 9 of Your Own Programs: The microprocessor controlled keyboard allows the user to set up to nine customized programs for all time and temperature functions. You can set these programs to fit your own special processing needs.